Air Register: Service and Repair

VENTILATOR GRILLE REMOVAL/INSTALLATION

Driver's Side

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate Front Scuff Plate Removal/Installation

c. Front side trim Front Side Trim Removal/Installation

d. Hood release lever Service and Repair

e. Lower panel Lower Panel Removal/Installation

f. Decoration panel Decoration Panel Removal/Installation

g. Dashboard center panel Dashboard Center Panel Removal/Installation

h. Meter hood Meter Hood Removal/Installation

i. Instrument cluster Removal and Replacement

j. Dashboard garnish Dashboard Garnish Removal/Installation

3. Pull the driver-side ventilator grille outward and remove it.

4. Remove the screw, then remove the driver-side demister grille.






5. Install in the reverse order of removal.

Passenger's Side

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate Front Scuff Plate Removal/Installation

c. Front side trim Front Side Trim Removal/Installation

d. Glove compartment Service and Repair

e. Decoration panel Decoration Panel Removal/Installation

f. Dashboard center panel Dashboard Center Panel Removal/Installation

g. Dashboard garnish Dashboard Garnish Removal/Installation

3. Pull the passenger-side ventilator grille outward and remove it.

4. Remove the screw, then remove the passenger-side demister grille.






5. Install in the reverse order of removal.

Center

1. Remove the decoration panel. Decoration Panel Removal/Installation

2. Remove the dashboard center panel. Dashboard Center Panel Removal/Installation

3. Remove the screws, then remove the center ventilator grilles.






4. Install in the reverse order of removal.