Selector Lever Inspection

SELECTOR LEVER INSPECTION

1. Turn the ignition switch to the ON position (engine OFF).

2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.






3. Verify that the selector lever can be shifted.

4. Verify that there is a "click" at each position when shifted from the P position to M range.

5. Verify that the positions of the selector lever and the indicator are aligned.






- If there is any malfunction, adjust the TR switch. Transaxle Range (TR) Switch Adjustment [FN4A-EL] Transaxle Range (TR) Switch Adjustment [FS5A-EL]

6. Verify that the vehicle operates in each selected range.