Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> 3 L4-2.3L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Arm >> Service and Repair >> Windshield Wiper Arm And Blade Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Wiper Arm And Blade Removal/Installation




WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION

WARNING:
- When the ignition switch is turned to the ON position, and the wiper and washer switch is in the AUTO position, the windshield wipers may operate automatically in the following cases. Always turn the ignition switch, and the wiper and washer switch off before handling the windshield wipers; otherwise a pinched hand or fingers could result in injury or a wiper system malfunction:

- The upper part of the windshield rain sensor is touched.
- The windshield receives an impact.
- The rain sensor receives an impact from the cabin.

1. Remove in the order indicated in the table.










2. Install in the reverse order of removal.

3. Adjust the windshield wiper arm and blade. Windshield Wiper Arm And Blade Adjustment

Windshield Wiper Arm Installation Note

1. Clean the windshield wiper arm connector shafts using a wire brush before installing the windshield wiper arms.






pro multis · About Operation CHARM