Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2010 >> 5 L4-2.3L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Stabilizer Bar >> Service and Repair >> Rear Stabilizer Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Stabilizer Removal/Installation




REAR STABILIZER REMOVAL/INSTALLATION

1. Remove in the order indicated in the table.

2. Install in the reverse order of removal.










Stabilizer Bracket Installation Note

1. Verify the installation direction of the stabilizer bracket (the arrow should point up) by placing the stabilizer bar so that the identification mark faces the right side of the vehicle.

2. Install the stabilizer bush bracket at the position shown in the figure.






Rear Stabilizer Component Installation Note

1. With the arrow on the stabilizer bracket facing the vehicle front, tighten the bolts.






pro multis · About Operation CHARM