Clearing DTC - Audio

CLEARING DTC [AUDIO]

CAUTION:
- Before clearing the DTCs, be sure to enter all of the DTCs displayed in the DTC inspection in the Audio Repair Order Form.

Without Display

1. Launch the on-board diagnostic test mode. DTC Inspection - Audio

2. While pressing the POWER/VOLUME switch, simultaneously press the AUDIO CONT switch for 2 s or more.






3. To stop the on-board diagnostic test mode, ignition is switched to off.

With Display

1. Launch the on-board diagnostic test mode. DTC Inspection - Audio

2. While pressing the POWER/VOLUME switch, simultaneously press the AUDIO CONT switch for 3 s or more.






3. To stop the on-board diagnostic test mode, ignition is switched to off.