B-Pillar Upper Trim Removal/Installation

B-PILLAR UPPER TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
a. Adjust anchor cover Front Seat Belt Removal/Installation

b. Upper anchor installation bolts of the front seat belt Front Seat Belt Removal/Installation

c. Front scuff plate Front Scuff Plate Removal/Installation

d. Rear scuff plate Rear Scuff Plate Removal/Installation

2. Partially peel back the seaming welt.

3. Remove the B-pillar lower trim. B-Pillar Lower Trim Removal/Installation

4. Grasp the lower end of the B-pillar upper trim, pull it in the direction of the arrow shown in the figure, and remove hooks A, guide pin B, pins C, and clip D.






5. Remove the B-pillar upper trim in the direction of the arrow shown in the figure.






CAUTION:
- When removing the B-pillar upper trim, be careful not to damage the tabs.

6. If there is a remaining clip D, rotate it 90° in the direction of the arrow shown in the figure and remove it.






7. Remove clip D and install it to the B-pillar upper trim.

8. Install in the reverse order of removal.