Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> 3 L4-2.0L (SKYACTIV-G) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Removal and Replacement >> Plug Hole Plate Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Plug Hole Plate Removal/Installation





PLUG HOLE PLATE REMOVAL/INSTALLATION [SKYACTIV-G 2.0]

Removal

1. Pull up the front part of the plug hole plate in the direction of the arrow and remove the rubber from the adapter on the engine side.






2. Pull out the plug hole plate from the pin on the engine side in the direction of the arrow and remove the plug hole plate.






Installation

1. Place the guide shown in the figure on the center part of the oil filler cap.






2. Press the guide in the direction of the arrow with the guide placed along the oil filler cap, and insert the rubber until it contacts the pin on the engine side.






3. Press the front of the plug hole plate in the direction of the arrow with both hands to insert the rubber to the adapter on the engine side.






pro multis · About Operation CHARM