Engine Oil: Testing and Inspection

ENGINE OIL LEVEL INSPECTION [SKYACTIV-G 2.0]

1. Position the vehicle on level ground.

2. Warm up the engine.

3. Stop the engine and allow at least 5 min before continuing.

4. Remove the dipstick, wipe it cleanly, and reinstall it fully.

5. Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick.






- If the oil level is below the L mark, add engine oil.

- If the oil level is above the F mark, penetration of fuel into the engine oil can be considered. Replace the engine oil.

6. Insert the oil level gauge completely until it attaches to the cylinder head cover.