Rear Shelf: Service and Repair

REAR PACKAGE TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
a. Rear seat cushion Rear Seat Cushion Removal/Installation

b. Rear scuff plate Rear Scuff Plate Removal/Installation

c. Tire house trim Tire House Trim Removal/Installation

d. C-pillar trim C-Pillar Trim Removal/Installation

2. Fold the rear seat back.

3. Remove the fasteners.






4. Pull up the rear package trim in the direction of the arrow (1) shown in the figure while remove the clips and pin, pull the rear package trim in the direction of the arrow (2), and remove it while pulling out the guides.






5. Install in the reverse order of removal.