Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> Mazdaspeed3 L4-2.3L Turbo >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Reservoir >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Reservoir: Service and Repair





WASHER TANK REMOVAL/INSTALLATION

Vehicles with the washer fluid-level sensor

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the front bumper. Front Bumper Removal/Installation

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Vehicles without the washer fluid-level sensor

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the front bumper. Front Bumper Removal/Installation

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Cap Installation Note

CAUTION:
- After installing the cap, verify that there is no gap between the upper part of the cap and the bottom surface of the washer tank. Otherwise, water leakage could occur.





pro multis · About Operation CHARM