Preparation For Test
Preliminary work:
Perform Diagnosis, Check Diagnostic Trouble Code (DTC) Memory.
Preparation for Test:
1. Fuses OK.
2. Battery voltage > 11 V.
3. Install model specific HHT module into HHT.
4. Voltage to control modules and CAN data lines Ok.
5. Connect the Hand-Held Tester (HHT) to X11/4.
Special Tools:
Conventional Tools, Test Equipment
Description Brand, Model, etc
Multimeter 1) Fluke models 23, 83, 85, 87, 88
1)Available through the MBNA Standard Equipment Program