Wiper Mounting Arm and Pivot Shaft

Wiper Mounting Arm and Pivot Shaft

Removal and Installation

1. Remove the wiper pivot arms and cowl panel grille. For additional information, refer to Wiper Pivot Arm - Front Wiper Pivot Arm - Front

2. Remove the wiper mounting arm and wiper pivot shaft assembly.

1. Disconnect the electrical connector.

2. Remove the 3 bolts.
- To install, tighten to 8 Nm (71 lb-in).





3. To install, reverse the removal procedure.
- Adjust the wiper pivot arms. For additional information, refer to Wiper Blade and Pivot Arm Adjustment - Windshield Adjustments.