51 47 000 Removing and Installing/Replacing Front Left or Right Entrance Cover Strip

51 47 000 - Removing and installing/replacing front left or right entrance cover strip





Move front seat forwards completely.
Release screw (1) of rear left belt anchorage.

Installation:
Tightening torque 72 11 4AZ [1][2]Seat Belt Systems.





Partially detach mucket (1).
Release expansion rivets (2).

Installation:
If necessary, replace faulty expander rivets (2).





Release expander rivet (1) on entrance cover strip (2).

Installation:
If necessary, replace faulty expander rivet (1).





Move front seat back completely.
Unclip clips (1) on entrance cover strip (2).





Feed out entrance cover strip (1) at front and rear in direction of arrow.

Important!
Before removing entrance cover strip (1), cover seat panel with cloth (risk of damage/scratching).

Remove entrance cover strip (1) towards top.





Installation:
If necessary, replace faulty clips (1) on entrance cover strip (2).