Intake Manifold: Service and Repair

REMOVAL AND INSTALLATION [2.4L ENGINE]













REMOVAL SERVICE POINT

[[A]] POWER STEERING OIL PUMP ASSEMBLY REMOVAL

1. With the hose installed, remove the power steering oil pump assembly from the bracket.

2. Tie the removed power steering oil pump assembly with a string at a position where it will not interfere with the removal and installation of the intake manifold.

INSTALLATION SERVICE POINTS

]]A[[ SCREW INSTALLATION

CAUTION:
Do not over-tighten. As the self-forming-type screw is used, the excessive torque can damage the intake manifold threads.

]]B[[ MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

CAUTION:

- Install the manifold absolute pressure sensor, taking care not to give a shock to it.

- Do not use a manifold absolute pressure sensor that has fallen down.

]]C[[ INTAKE MANIFOLD ASSEMBLY/INJECTOR PROTECTOR FRONT INSTALLATION

Install the intake manifold assembly and the injector protector front, and tighten mounting bolts and nuts temporarily.

NOTE:
The tightening of the fuel rail, the intake manifold assembly and the injector protector front and rear has the specified order. Temporarily tighten the intake manifold assembly and injector protector front mounting bolts and nuts Service and Repair).