Programming and Relearning

LEARNING PROCEDURES OF THE SUNSHADE FULLY CLOSED POSITION

Shifting conditions for the fully closed position adjustment mode

- When shifting to the forced fully closed position adjustment mode
How to shift to the forced fully closed position adjustment mode
1. Turn the ignition switch to the "ON" position.
2. Press and hold the close switch for 10 seconds when the sunshade lid is fully closed.
- When the position information may be incorrect due to abnormal power supply during the sunshade operation

NOTE:
When installing the sunshade assembly, or installing/replacing the sunshade motor assembly, operate the forced fully closed position adjustment mode to adjust the fully closed position.

How to adjust the fully closed position [Forced fully closed position adjustment mode]

After shifting to the forced fully closed position adjustment mode, press the close switch for 2 seconds.

How to adjust the fully closed position [When the sunshade motor assembly is replaced with a new one]

Press and hold the close switch to move the sunshade to the fully closed position. After the sunshade is fully closed, press the close switch for 2 seconds.