Inspection Procedure 2
Accelerator Pedal Operation Not Smooth (Over Acceleration)DIAGNOSIS
STEP 1. Check the accelerator pedal.
Q: Is the accelerator pedal loose?
YES: Tighten, then go to Step 4.
NO: Go to Step 2.
STEP 2. Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
YES: Repair, then go to Step 4.
NO: Go to Step 3.
STEP 3. Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
YES: There is no action to be taken.
NO: Refill or replace the lubricant, then go to Step 4.
STEP 4. Check symptom.
Q: Does the accelerator pedal work normally?
YES: This diagnosis is complete.
NO: Go to Step 1.