Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2012 >> Lancer AWD L4-2.4L (4B12) >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Interior Moulding / Trim: Service and Repair




REMOVAL AND INSTALLATION

[LANCER]













Required Special Tool:

- MB990784: Ornament Remover

CLIP AND CLAW POSITIONS





NOTE:
Each number in the illustration indicates a part number.

[LANCER SPORTBACK]













Required Special Tool:

- MB990784: Ornament Remover

CLIP AND CLAW POSITIONS





NOTE:
Each number in the illustration indicates a part number.

REMOVAL SERVICE POINTS

[[A]]FRONT/REAR PILLAR TRIM REMOVAL [VEHICLES WITH CURTAIN AIR BAG]





1. Pull down the front or rear pillar trim as shown in the figure.
2. Cut the clip at the cutting position shown in the figure, taking care not to damage the other components.
3. Remove the clip remaining on the front or rear pillar trim, taking care not to scratch the trim.
4. Remove the clip remaining on the vehicle side by breaking it to prevent damage to the flange of the clip mounting hole.

[[B]] UPPER CENTER PILLAR TRIM CAP REMOVAL





Remove the opening trim. Remove the upper center pillar trim cap by inserting the special tool MB990784 between the upper center pillar trim and body as shown in the illustration.

[[C]] REAR SEAT FOLDING CABLE REMOVAL





Among the three fixed positions, securely fit the rear seat folding cable in the center position.
pro multis · About Operation CHARM