C1712

C1712 - C1715, C1720 - C1723, C1724 - C1727 TRANSMITTER MALFUNCTION

Description
One or more transmitters are malfunctioning internally.

DTC Logic

DTC DETECTION LOGIC:

DTC CONFIRMATION PROCEDURE

1. DRIVE VEHICLE
1. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes.
2. Check all tire pressures with CONSULT-III within 5 minutes.
Does DATA MONITOR ITEM display tire pressure as normal without any warning lamp?
YES >> Inspection End.
NO >> Refer to "Transmitter Malfunction".

Transmitter Malfunction

MALFUNCTION CODE NO. 31 - 34, 41 - 44, 45 - 48

1. PERFORM ID REGISTRATION
1. Carry out ID registration of all transmitters. Refer to WT-6, "ID Registration Procedure". ID Registration Procedure
2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes.
>> GO TO 2

2. REPLACE TRANSMITTER
1. Check low tire pressure warning lamp again for flashing, replace malfunctioning transmitter.
2. Carry out ID registration of all transmitters.
Can ID registration of all transmitters be completed?
YES >> GO TO 3
NO >> GO TO WT-13, "Data from Transmitter Not Being Received". C1708

3. DRIVE VEHICLE
1. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes.
2. Check all tire pressures with CONSULT-III within 5 minutes.
Does DATA MONITOR ITEM display tire pressure as normal without any warning lamp?
YES >> Inspection End.
NO >> Replace malfunctioning transmitter, and perform Step 3 again.

Special Repair Requirement
Perform preliminary check. Refer to WT-5, "Preliminary Check". Preliminary Check