Propeller Shaft 2F1310

PROPELLER SHAFT


Removal and Installation


COMPONENTS






REMOVAL
1. Put matching marks on the front propeller shaft flange yoke and the front final drive companion flange as shown.






CAUTION:
For matching marks, use paint. Never damage the flange yoke and companion flange of the front final drive.
2. Put matching marks on the front propeller shaft flange yoke and the transfer companion flange.

CAUTION:
For matching marks, use paint. Never damage the flange yoke and companion flange of the front final drive.
3. Remove the bolts and then remove the front propeller shaft from the front final drive and transfer.

INSPECTION
- Inspect the propeller shaft runout. If runout exceeds the limit, replace the propeller shaft assembly. Refer to Propeller Shaft 2F1310.





- While holding the flange yoke on one side, check axial play of the joint as shown. If the journal axial play exceeds the specification, repair or replace the journal parts. Refer to Propeller Shaft 2F1310.
- Check the propeller shaft tube surface for dents or cracks. If damage is detected, replace the propeller shaft assembly.






INSTALLATION
Installation is in the reverse order of removal.
- After installation, check for vibration by driving the vehicle. Refer to Propeller Shaft 2F1310.

CAUTION:
Do not reuse the bolts and nuts. Always install new ones.