Intake Sensor

INTAKE SENSOR


Removal and Installation


REMOVAL
1. Remove the front kick plate. Service and Repair.
2. Remove the front pillar lower finisher. Service and Repair.
3. Remove the lower glove box. Exploded View.
4. Remove the upper glove box (cluster lid E). Exploded View.





5. Disconnect the intake sensor electrical connector.

NOTE:
The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
6. Remove the intake sensor from the front heater and cooling unit assembly.

INSTALLATION
Installation is in the reverse order of removal.