Pedal Adjusting Switch Power Supply And Ground Circuit Inspection

ADJUSTABLE PEDAL SYSTEM

Pedal Adjusting Switch Power Supply and Ground Circuit Inspection


1. CHECK PEDAL ADJUSTING SWITCH POWER SUPPLY






1.Turn ignition switch OFF.
2.Disconnect pedal adjusting switch.
3.Check voltage between pedal adjusting switch connector M84
terminal 1 and ground.
1 - Ground: Battery voltage
Is inspection result normal?
YES- GO TO 2
NO- Repair or replace harness.

2. CHECK PEDAL ADJUSTING SWITCH GROUND CIRCUIT






Check continuity between pedal adjusting switch connector M84 terminal 4 and ground.
4 - Ground: Continuity should exist.
Is inspection result normal?
YES- Pedal adjusting switch power supply and ground circuit is OK.
NO- Repair or replace harness.