Collision Avoidance Sensor: Service and Repair

SONAR SENSOR

Removal and Installation


REMOVAL

1.Remove the bumper fascia assembly. Exploded View.
2.Disconnect sonar sensor connector.
3.Press out the sonar sensor from back of bumper fascia assembly to remove sonar sensor.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
The connector direction is shown below:
- The connectors must be faced left ward when viewed from the vehicle rear side.
- within ±10� from the horizontal position when assembling the bumper.Please refer below drawing for connector direction of the sensor. (About all sensors)