CVT Position With Manual Mode

CVT POSITION

WITH MANUAL MODE : Inspection and Adjustment


INSPECTION

1.Shift selector lever to "P" position, and turn ignition switch ON (engine stop).
2.Check that selector lever can be shifted to other than "P" position when brake pedal is depressed. Also check that selector lever can be shifted from "P" position only when brake pedal is depressed.
3.Shift selector lever and check for excessive effort, sticking, noise or rattle.
4.Check that selector lever stops at each position with the feel of engagement when it is shifted through all the positions. Check that the actual position of selector lever matches the position shown by shift position indicator and manual lever on the transaxle.





5.The method of operating selector lever to individual positions correctly should be as shown.
6.When selector button is pressed in "P", "R" or "N" position without applying forward/backward force to selector lever, check button operation for sticking.
7.Check that back-up lamps illuminate only when selector lever is placed in the "R" position.
8.When in "R" position, check that back-up lamps do not illuminate even when the selector lever is in the "P" position.

CAUTION:
Check the lighting without pressing shift button.
9.Check that back-up lamps do not illuminate when selector lever is pushed toward the "R" position when in the "P" or "N" position.

CAUTION:
Check the lighting without pressing shift button.
10.Check that the engine can only be started with selector lever in the "P" and "N" positions.
11.Check that transaxle is locked completely in "P" position.
12.When selector lever is set to manual shift gate, check that manual mode is displayed on combination meter.
Shift selector lever to "+" and "-" sides, and check that set shift position changes.

ADJUSTMENT

1.Shift selector lever to "P" position.

CAUTION:
Turn wheels more than 1/4 rotations and apply the park lock.





2.Loosen nut (A).
3. Place manual lever (B) to "P" position.

CAUTION:
Never apply any force to manual lever.
4.Tighten nut. Exploded View.

CAUTION:
Fix manual lever when tightening.