Removal And Installation

CENTER CONSOLE ASSEMBLY

Removal and Installation


CAUTION:
When removing, always use a remover tool that is made of plastic.

REMOVAL

1.Remove console finisher.
1.Put selector lever in [N] or [D] position.





2.Remove console finisher (1) fixing pawls and metal clips with remover tool (A).
3.Pull console finisher upward to disengage from center console.





2.Remove cluster lid D.





1.Using remover tool (A), release cluster lid D (1) fixing pawls and clips, from lower to upper, from Instrument panel.
2.Release harness connectors.





3.Remove instrument lower covers (LH and RH).










1.Pull from the rear of instrument lower cover (1) to release rear pawls, use remover tool to release upper clips.
2.Pull backward to release instrument lower cover from instrument panel.






CAUTION:
To avoid damaging parts, it is important to take care for removal of this part.
4.Remove center console assembly.





1.Remove screws (A) of center console front side.
2.Remove center console (1) front fixing screws (A) and clips (B).





3.Remove center console rear fixing screws (A), move forward front seats if necessary.





4.Lift up the center console, and then disconnect harness connectors.

CAUTION:
Always move center console with caution to avoid damaging seats, or other part.

INSTALLATION

Install in the reverse order of removal.