Cruise Test - Part 2

Cruise Test - Part 2
1. CHECK STARTING FROM D1
1. Move selector lever the "D" position.
2. Accelerate at half throttle.

With CONSULT-II
Read the gear position.
Does it start from D1 ?
Yes >> GO TO 2.
No >> Enter a check mark at "Vehicle cannot be started from D1" on the diagnostics worksheet, then continue the road test.

2. CHECK SHIFT-UP D1 -> D2
Press the accelerator pedal down all the way and inspect whether or not the transaxle shifts up (D1 -> D2) at the correct speed.

With CONSULT-II
Read the gear position, accelerator angle and vehicle speed.
Does the A/T shift-up D1 -> D2 at the correct speed?
Yes >> GO TO 3.
No >> Enter a check mark at "Vehicle does not shift D1 -> D2" on the diagnostics worksheet, then continue the road test.

3. CHECK SHIFT-UP D2 -> D3
Press the accelerator pedal down all the way and inspect whether or not the transaxle shifts up (D2 -> D3) at the correct speed.

With CONSULT-II
Read the gear position, accelerator angle and vehicle speed.
Does the A/T shift-up D2 -> D3 at the correct speed?
Yes >> GO TO 4.
No >> Enter a check mark at "Vehicle does not shift D2 -> D3" on the diagnostics worksheet, then continue the road test.

4. CHECK SHIFT-UP D3 -> D4 AND ENGINE BRAKE
When the transaxle changes speed D2 -> D3, return the accelerator pedal.
Does the A/T shift-up D3 -> D4 and apply the engine brake?
Yes >> 1. Stop the vehicle. 2. Go to Cruise test - Part 3. Cruise Test - Part 3
No >> Enter a check mark at "Vehicle does not shift D3 -> D4" on the diagnostics worksheet, then continue the road test.