Drive Belt: Testing and Inspection

Checking Drive Belts





WARNING:
^ Be sure to perform when the engine is stopped.
^ Make sure that indicator (single line notch) of each automatic tensioner is within the allowable working range (between three notches).

NOTE:
^ Check the automatic tensioner indicator when the engine is cold.
^ The indicator notch is located on the moving side of the tensioner.
Visually check entire belt for wear, damage or cracks.
^ If the indicator is out of allowable working range or belt is damaged, replace the belt.
^ Belt tensioning is not necessary, as it is automatically adjusted by auto belt tensioner.