C1729

Vehicle Speed Signal
MALFUNCTION CODE NO. 52
1. CHECK SELF-DIAGNOSTIC RESULTS
1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.
3. Turn the ignition switch ON.
4. Touch "START (NISSAN BASED VHCL)".
5. Touch "BCM" on "SELECT SYSTEM" screen.

NOTE: If "BCM" is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". Electrical Diagrams

6. Touch "BCM C/U" on "SELECT SYSTEM" screen.
7. Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
8. Check display contents in self-diagnostic results.
Is the "CAN COMM CIRCUIT" displayed in the self-diagnosis display?
YES >> Perform trouble diagnosis for CAN communication system. Refer to LAN-3, "Precautions When Using CONSULT-II". Precautions When Using CONSULT-II
NO >> Check combination meter.