CAN Communication
CAN COMMUNICATIONSystem Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Unit
NOTE: Confirming the presence of the following items helps to identify CAN system type.
- Models with VDC
- Models with TCS
TYPE 1
System Diagram:
System Diagram
Input/Output Signal Chart Part 1:
Input/Output Signal Chart Part 2:
Input/output Signal Chart
TYPE 2
System Diagram:
System Diagram
Input/Output Signal Chart Part 1:
Input/Output Signal Chart Part 2:
Input/output Signal Chart
TYPE 3
System Diagram:
System Diagram
Input/Output Signal Chart Part 1:
Input/Output Signal Chart Part 2:
Input/output Signal Chart
TYPE 4
System Diagram:
System Diagram
Input/Output Signal Chart:
Input/output Signal Chart
TYPE 5
System Diagram:
System Diagram
Input/Output Signal Chart Part 1:
Input/Output Signal Chart Part 2:
Input/output Signal Chart