Cruise Test - Part 3
Cruise Test - Part 31. MANUAL MODE FUNCTION
Move to manual mode from "D" position.
Does it switch to manual mode?
YES >> GO TO 2.
NO >> Continue road test and add check mark to "Cannot Be Changed to Manual Mode" on the AT-45, "DIAGNOSTIC WORKSHEET".
2. CHECK SHIFT-DOWN
During manual mode driving, is downshift from M5 -> M4 -> M3 -> M2 -> M1 performed?
WITH CONSULT-II
Read the gear position.
Is downshifting correctly performed?
YES >> GO TO 2.
NO >> Enter a check mark at "A/T Does Not Shift" at the corresponding position (5th -> 4th, 4th -> 3rd, 3rd -> 2nd, 2nd -> 1st) on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test.
3. CHECK ENGINE BRAKE
Check engine brake.
Does engine braking effectively reduce speed in M1 position?
YES >>
1. Stop the vehicle.
2. Perform self-diagnostics. Refer to AT-92, "SELF-DIAGNOSTIC RESULT MODE", AT-102, "Diagnostic Procedure Without CONSULT-II". Reading Diagnostic Trouble Codes
NO >> Enter a check mark at "Vehicle Does Not Decelerate by Engine Brake" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue trouble diagnosis.