High and Low Reverse Clutch
High and Low Reverse ClutchAT-269 COMPONENTS:
DISASSEMBLY
1. Remove bearing race from high and low reverse clutch drum.
2. Remove snap ring from high and low reverse clutch drum using a flat-bladed screwdriver.
3. Remove retaining plate, drive plates and driven plates from high and low reverse clutch drum.
INSPECTION
Check the following, and replace high and low reverse clutch assembly if necessary.
High and Low Reverse Clutch Snap Ring
^ Check for deformation, fatigue or damage.
High and Low Reverse Clutch Drive Plates
^ Check facing for burns, cracks or damage.
High and Low Reverse Clutch Retaining Plate and Driven Plates
^ Check facing for burns, cracks or damage.
ASSEMBLY
1. Install driven plates, drive plates and retaining plate in high and low reverse clutch drum.
CAUTION: Take care with order of plates.
2. Install snap ring in high and low reverse clutch drum using a flat-bladed screwdriver.
3. Install bearing race to high and low reverse clutch drum.
CAUTION: Apply petroleum jelly to bearing race.