Removal And Installation

CENTER CONSOLE ASSEMBLY


Removal and Installation


REMOVAL

CAUTION:
Be careful not to scratch console finishers and other parts.
1. Position both RH and LH front seats forward.
2. Disconnect the negative battery terminal.
3. Remove the console side finishers RH and LH.





4. Disconnect the console harness connectors (A).
5. Remove the selector lever knob. Refer to Removal And Installation.
6. Remove the CVT finisher, using a suitable tool.





7. Remove the console screws (A).
8. Remove the console screw cover, then remove the rear console screws (A) and then remove the console (1).






INSTALLATION
Installation is in the reverse order of removal.