VDC/TCS/ABS

TROUBLE DIAGNOSIS FOR SELF-DIAGNOSTIC ITEMS


CAN Communication System Inspection

INSPECTION PROCEDURE
1.SELF-DIAGNOSIS RESULT CHECK
Check the self-diagnosis results.






Is the above displayed in the self-diagnosis display items?
YES - GO TO 2.
NO - Inspection End.
2.CHECK CONNECTOR
1. Disconnect the ABS actuator and electric unit (control unit) connector, and check the terminals for deformation, disconnection, looseness, and so on. If there is a malfunction, repair or replace the terminals.
2. Reconnect connector to perform self-diagnosis. VDC/TCS/ABS.
Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display items?
YES - Trouble Diagnosis Flow Chart.
NO - Connector terminal connection is loose, damaged, open, or shorted.