Satellite Radio Tuner Bose Audio Without Navigation

SOUND SIGNAL CIRCUIT:_:SATELLITE RADIO TUNER

Description
Left and right channel audio signals are supplied from the satellite radio tuner to the audio unit through the sound signal circuits.

Diagnosis Procedure
Regarding Wiring Diagram information, Bose Audio Without Navigation.

LEFT CHANNEL
1.CHECK HARNESS

1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner (factory installed) connector
B123 and audio unit connector M47.
3. Check continuity between satellite radio tuner (factory installed) connector B123 (A) and audio unit connector M47 (B).

4. Check continuity between satellite radio tuner (factory installed) connector B123 (A) and ground.

Are continuity results as specified?
YES - GO TO 2
NO - Repair harness or connector.
2.CHECK LEFT CHANNEL AUDIO SIGNAL
1. Connect satellite radio tuner (factory installed) and audio unit.
2. Turn ignition switch ON.

3. Check signal between satellite radio tuner (factory installed) connector B123 terminals 21 and 22 with CONSULT-III or oscilloscope.

Are voltage readings as specified?
YES - Replace audio unit. Removal And Installation Bose Audio Without Navigation.
NO - Replace satellite radio tuner. Removal And Installation Bose Audio Without Navigation.

RIGHT CHANNEL
1.CHECK HARNESS

4. Check continuity between satellite radio tuner (factory installed) connector B123 (A) and ground.

Are continuity results as specified?
YES - GO TO 2
NO - Repair harness or connector.
2.CHECK RIGHT CHANNEL AUDIO SIGNAL
1. Connect satellite radio tuner (factory installed) and audio unit.
2. Turn ignition switch ON.

3. Check signal between satellite radio tuner (factory installed) connector B123 terminals 23 and 24 with CONSULT-III or oscilloscope.