Power Distribution Module: Service and Repair

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)


Removal and Installation


CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.

REMOVAL
1. Disconnect the 12-volt battery cable from the negative terminal.





2. Remove the IPDM E/R cover (1) while pressing the pawl (A) at the rear end of the IPDM E/R cover (1).





3. Disconnect the harness connectors from the IPDM E/R.





4. While depressing the tabs (A) remove the IPDM E/R (1) from the vehicle.

INSTALLATION
Installation is in the reverse order of removal.