CVT Selector Lever (Park Position Switch) Check

INTELLIGENT KEY SYSTEM


CVT Shift Selector (Park Position Switch) Check

1.CHECK CVT SHIFT SELECTOR (PARK POSITION SWITCH) INPUT SIGNAL
1. Turn ignition switch OFF.
2. Check for continuity between Intelligent Key unit harness connector M42 terminal 10 and ground.











OK or NG
OK - Replace Intelligent Key unit. Service and Repair .
NG - GO TO 2.
2.CHECK CVT SHIFT SELECTOR (PARK POSITION SWITCH) GROUND CIRCUIT
1. Disconnect CVT shift selector (park position switch) connector.





2. Check for continuity between CVT shift selector (park position switch) harness connector M38 terminal 2 and ground.






OK or NG
OK - GO TO 3.
NG - Repair or replace harness.
3.CHECK CVT SHIFT SELECTOR (PARK POSITION SWITCH)
Check continuity between CVT shift selector (park position switch) terminals 2 and 5.











OK or NG
OK - Repair or replace harness.
NG - Replace CVT shift selector (park position switch).