Special Repair Requirement

INSPECTION AND ADJUSTMENT

CONFIGURATION (BCM) : Special Repair Requirement


1. WRITING MODE SELECTION

CONSULT Configuration
Select "CONFIGURATION" of BCM.
When writing saved data-GO TO 2
When writing manually-GO TO 3

2. PERFORM "WRITE CONFIGURATION - CONFIG FILE"

CONSULT Configuration
Perform "WRITE CONFIGURATION - Config File".
- Inspection End.

3. PERFORM "WRITE CONFIGURATION - MANUAL SELECTION"

CONSULT Configuration
1.Select "WRITE CONFIGURATION - Manual selection".
2.Identify the correct model and configuration list. Configuration List.
3.Confirm and/or change setting value for each item.
4.Select "Setting change".

CAUTION:
Make sure to select "Setting change" even if the indicated configuration of brand new BCM is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model cannot be memorized.
5.When "COMMAND FINISHED", select "END".
- GO TO 4

4. OPERATION CHECK

Confirm that each function controlled by BCM operates normally.
- Inspection End.