Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Leaf ELE-Electric Engine >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Testing and Inspection >> Programming and Relearning >> VCM >> Work Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Work Procedure




ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

VCM : Work Procedure


1. PERFORM VCM RECOMMUNICATING FUNCTION

1.Install VCM.
2.Contact backside of registered Intelligent key* to power switch while brake pedal is depressed, then turn power switch to the ON position.
*: To perform this step, use the key that is used before performing VCM replacement.
3.Maintain power switch in the ON position for at least 5 seconds.
4.Turn power switch to the OFF position.
5.Check that the vehicle can be set to READY.
- GO TO 2.

2. PERFORM ADDITIONAL SERVICE WHEN REPLACING VCM

Perform the following procedure "Removal and Installation" Removal And Installation.
- END
pro multis · About Operation CHARM