Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal And Installation




WASHER TANK

Removal and Installation


REMOVAL

1.Fully open hood.
2.Remove washer tank inlet fixing clip.
3.Pull out washer tank inlet from washer tank.
4.Remove front bumper fascia. Refer to "Removal and Installation" Removal And Installation.
5.Disconnect washer pump harness connector and remove the fixing clip.
6.Disconnect washer level switch harness connector (if equipped).
7.Disconnect front washer tube and rear washer tube.
8.Remove washer tank mounting bolts.
9.Remove washer tank.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Add water up to the top of washer tank inlet after installing and check that there is no leakage.