S9.8 - K - Clear Lacquer
K - Clear Lacquer
S 9.8.1 Standocryl(R) 2K Crystal Clear
S 9.8.1.1 Processing
S 9.8.2 Standocryl(R) 2K System Clear
S 9.8.2.1 Processing
S 9.8.3 Standocryl(R) 2K MS Express Clear
S 9.8.3.1 Processing
S 9.8.4 Standocryl(R) 2K Plastic Clear Satin Gloss
S 9.8.4.1 Processing
S 9.8.5 Standocryl(R) 2K HS Clear
S 9.8.5.1 Processing
S 9.8.1 Standocryl(R) 2K Crystal Clear
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Two-component clear lacquer
Properties:
- Top-quality clear lacquer for partial and complete paint finishes
- Good filling properties
- Optimum flow
- Brilliant shine
Base surfaces:
- Standox(R) Basecoat
- Standohyd(R) Basecoat
NOTE:
- Raw material base: Two-component acrylic resin
- Flash point: 26° C/78.8° F
- Spec. weight: 0.99 g/cm3
- Solid content: 47.9% weight/41.3% vol.
- Theoretical yield: 7.8 m2/ltr. with a dry coat thickness of 50 microns
- Clean equipment after use with cleaning thinner
VOC value:
- 513 g/l
WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free.
S 9.8.1.1 Processing
S 9.8.2 Standocryl(R) 2K System Clear
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Two-component clear lacquer
Properties:
- Highly reactive repair clear lacquer
- For all workshop conditions
- Dries well and very quickly
- Excellent polishing properties
Base surfaces:
- Standox(R) Basecoat
- Standohyd(R) Basecoat
NOTE:
- Raw material base: Two-component acrylic resin
- Flash point: 30° C/86.0° F
- Spec. weight: 0.97 g/cm3
- Solid content: 45.6% weight/39.4% vol.
- Theoretical yield: 7.4 m2/ltr. with a dry coat thickness of 50 microns
- Clean equipment after use with cleaning thinner
VOC value:
- 530 g/l
WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free.
S 9.8.2.1 Processing
S 9.8.3 Standocryl(R) 2K MS Express Clear
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Two-component clear lacquer
Properties:
- Highly reactive clear lacquer for partial and complete paint finishes
- Optimum flow
- High creep strength
- High mechanical and chemical resistance
- Wide processing spectrum
- Well suited for air drying
- Excellent polishing properties
Base surfaces:
- Standox(R) Basecoat
- Standohyd(R) Basecoat
NOTE:
- Raw material base: Two-component acrylic resin
- Flash point: 29° C/84.2° F
- Spec. weight: 0.98 g/cm3
- Solid content: 45.8% weight/39.3% vol.
- Theoretical yield: 7.3 m2/ltr. with a dry coat thickness of 50 microns
- Clean equipment after use with cleaning thinner
VOC value:
- 530 g/l
WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free.
S 9.8.3.1 Processing
S 9.8.4 Standocryl(R) 2K Plastic Clear Satin Gloss
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Two-component clear lacquer
Properties:
- Special satin gloss 2K clear lacquer
- For plastics
- Elastic-rendered
- High mechanical and chemical resistance
- Approx. 50% shine (60° angle)
Higher gloss level:
- Hardener with higher solid content
- Slower hardener
- Slower thinner
- Higher processing viscosity
- Higher dry coat thickness
- Shorter drying times
- Faster drying
Lower gloss level:
- Hardener with lower solid content
- Faster hardener
- Faster thinner
- Lower processing viscosity
- Lower dry coat thickness
- Longer drying times
- Air drying
Base surfaces:
- Standox(R) Basecoat
- Standohyd(R) Basecoat
NOTE:
- Raw material base: Two-component acrylic resin
- Flash point: 24° C/75.2° F
- Spec. weight: 1.04 g/cm3
- Solid content: 51.3% weight/42.8% vol.
- Theoretical yield: 7.8 m2/ltr. with a dry coat thickness of 50 microns
- Clean equipment after use with cleaning thinner
VOC value:
- 505 g/l
WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free
S 9.8.4.1 Processing
9.8.5 Standocryl(R) 2K HS Clear
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- 2K high-solid clear lacquer
Properties:
- High-quality clear lacquer for partial and complete paint finishes
- Solvent-reduced
- High solid content
- Good resistance
- No added thinner required
- Efficient due to fewer spraying operations
Base surfaces:
- Standox(R) Basecoat
- Standohyd(R) Basecoat
NOTE:
- Raw material base: Two-component acrylic resin
- Flash point: 38° C/100.4° F
- Spec. weight: 1.01 g/cm3
- Solid content: 62.7% weight/56.8% vol.
- Theoretical yield: 9.9 m2/ltr. with a dry coat thickness of 50 microns
- Clean equipment after use with cleaning thinner
VOC value:
- 372 g/l
WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free.
S 9.8.5.1 Processing
S9.9 - Z - Additives