Ash Tray: Service and Repair

Removing And Installing Front Ashtray

Removing front ashtray







1. Remove front air-conditioning system regulator. Refer to Removing and installing front air-conditioning system regulator.
2. Open the front ashtray and remove the holder.
3. Remove front ashtray.
3.1. Put the gear-shift lever in the -D- position.
3.2. Undo fastening screws -2-.
3.3. Pull the front ashtray -1- to the rear -Arrow A-, until the plug becomes accessible.







4. Pull off plug.
4.1. Release -3- and pull off -Arrow B- plug.







5. Pull out ashtray -1- to the rear -arrow A-.







Installing front ashtray







1. Insert front ashtray -1- ( -arrow A- ).







2. Connect connector.
2.1. Push on the plug -3- until the locking tabs engage audibly -Arrow B-. When doing so, ensure that the plug -3- is positioned correctly in the mount -4- for the front ashtray -1-.










3. Install front ashtray.
3.1. Insert front ashtray -1- into the guides -5- and push it in completely -arrow A-.







3.2. Screw in -2- fastening screws.







3.3. Put the gear-shift lever in the -P- position.