722619 Removing and installing cover for backrest
WM 722619 Removing and installing cover for backrest
Technical values
Removing cover for backrest
Preliminary work
1. Remove front seat. -> 720119 Removing and installing front seat - section on "Removing" 720119 Removing and Installing Front Seat
2. Remove control module trim panel. -> 721619 Removing and installing control module trim panel - section on "Removing" 721619 Removing and installing control module trim panel
Removing cover for outer backrest
Installation position of backrest cover
1. Unscrew fastening screw -1- laterally out of the cover -2-.
Unscrewing fastening screw laterally
2. Unscrew lower fastening screw -1- out of the cover -2-.
Unscrewing lower fastening screw
3. Unclip cover -1- at the front -inset A- and remove by pulling backwards in direction of arrow -inset B-.
Remove cover
Installing cover for outer backrest
1. Insert cover -1- at the back in direction of arrow -inset A- and press into position at the front -inset B-.
Installing cover
2. Screw down the cover -2- from below with the fastening screw -1-.=> Tightening torque: 2.7 Nm (1.8 ftlb.)
Screwing down lower fastening screw
3. Screw down the cover -2- laterally with the fastening screw -1-.=> Tightening torque: 2.7 Nm (1.8 ftlb.)
Tightening the fastening screw laterally
Subsequent work
1. Install control module trim panel. -> 721619 Removing and installing control module trim panel - section on "Installing" 721619 Removing and installing control module trim panel
2. Install front seat. -> 720119 Removing and installing front seat - section on "Installing" 720119 Removing and Installing Front Seat