Front Fender Liner: Service and Repair

Removing And Installing Front Wheel Housing Liner

Technical values







Preliminary work
1. Remove front wheel.

Removing front wheel housing liner

Removing front wheel housing liner - rear section







INFORMATION: Fastening nuts cannot be used again following removal.







1. Unscrew fastening nuts -1- and fastening screws -2- .
2. Remove wheel housing liner -A- .

Remove front wheel housing liner - front section







1. Unscrew fastening screws -2, 3- and remove the front section of the front wheel housing liner -B- .

Installing front wheel housing liner

Install front wheel housing liner - front section







1. Insert front section of front wheel housing liner -B- .
2. Tighten fastening screws -2- . - Tightening torque: 2.8 Nm (2 ftlb.)
3. Tighten fastening screws -3- . - Tightening torque: 2.8 Nm (2 ftlb.)

Installing front wheel housing liner - rear section

INFORMATION:
- Push in wheel housing liner toward the outside up to contact in wing stop position.
- Ensure that the right wheel housing liner is guided through the opening on the wheel well.







1. Insert wheel housing liner -A- .
2. Tighten fastening nuts -1- . - Tightening torque: 2.5 Nm (2 ftlb.).
3. Tighten fastening screws -2- . - Tightening torque: 2.8 Nm (2 ftlb.).

Subsequent work
1. Fit front wheel.