681919 Removing and installing cover for centre console

WM 681919 Removing and installing cover for centre console

Technical values





Removing cover for centre console





1. Vehicles with manual transmission: remove shift lever knob => Removing shift lever knob.
2. Remove cover for lock latch.
2.1. Fold up middle armrest -2-.
2.2. Unscrew fastening screws -3-.
2.3. Remove cover for lock latch -4-.





3. Unclip cover for centre console.
3.1. Carefully fold up cover for centre console -1- until the retaining lugs -A- can be pulled out from the guides.
3.2. Pull cover for centre console -1- by the retaining lugs -A- from the guides.













4. Disconnect plug connection.
4.1. Press in the plug locking tabs -5- ( -arrow B- ).
4.2. Pull off plug -5- ( -arrow C- ).





5. Remove cover for centre console.

Installing cover for centre console





1. Push on the electrical plug connection.
1.1. Connect plug -5- to the cover.





2. Position cover for centre console.
2.1. Hook the tabs -A- into the guides.
2.2. Swivel the cover for the centre console -1- downwards.













3. Install cover for lock latch.
3.1. Position cover for lock latch -4-.
3.2. Screw in fastening screws -3- and tighten to the specified torque. => Tightening torque: 1.5 ftlb.+0.5 ftlb.
3.3. Fold down middle armrest -2-.





4. Vehicles with manual transmission: install shift lever knob => Installing shift lever knob.