Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 2007 >> 9-7X V8-5.3L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Shock / Support >> Service and Repair >> Liftgate Strut Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Liftgate Strut Replacement



Liftgate Strut Replacement

Removal Procedure

Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Open and support the liftgate.
Notice: Refer to Liftgate/Hood Assist Rod Notice.




2. Lift up the retainer clips on the liftgate struts using a small flat-bladed tool.
3. Remove the upper end of the liftgate struts from the ball joint.
4. Remove the lower end of the liftgate struts from the ball joint.
5. Remove the liftgate struts from the liftgate.

Installation Procedure




1. Position the liftgate struts to the liftgate.
2. Install the upper end of the liftgate struts to the ball joint. Press the struts into place until fully seated.
3. Install the lower end of the liftgate struts to the ball joint. Press the struts into place until fully seated.
4. Remove the support device from the liftgate.
5. Close the liftgate.

pro multis · About Operation CHARM