Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 2009 >> 9-7X V8-6.0L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair




Ignition and Start Switch Replacement

Removal Procedure

1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement (Console Shift Lever Bezel Replacement).
2. Remove the ignition switch assembly screws.




3. Disconnect the electrical connector.
4. Remove the ignition switch.

Installation Procedure




1. Locate the ignition switch to the console.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the screws securing the switch to the console and tighten to 2 Nm (18 in. lbs.).
3. Connect the electrical connector.
4. Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement (Console Shift Lever Bezel Replacement).

pro multis · About Operation CHARM