Chart 13 - Radio Noise Entering Through Radio (Sideway Noise)

Diagnostic Chart 13:

IMPORTANT: Only perform this chart if sent here from Chart 12, "Radio Noise." Chart 12 - Radio Noise

Sideway Noise
Any noise that enters the audio component by a radiated field through the component case. (Noise is reduced or eliminated when slowly moving the audio component from its fastened location.)

Some causes:
Noisy wires or metal cables around or on top of the radio.

Solutions:
^ Suppress or shield the noisy wire, metal cable, or reroute it.
^ Shield the radio case.
^ Use aluminum or nickel tape to ground the tape whenever shielding. (Nickel tape will also stop magnetic interference, aluminum tape will not.)