Fascia Replacement - Front Bumper

Fascia Replacement - Front Bumper

Removal Procedure




1. Remove the push-in retainers from the front of the front wheelhouse panel.




2. Remove the lower front fascia push-in retainers.
3. Remove the upper front fascia push-in retainers.
4. Disconnect the electrical connector from the fog lamp.
5. Disengage the fascia to the fender attaching tabs.
6. Slide the front fascia forward.
7. Remove the front bumper fascia from the vehicle.
8. If a new fascia is being installed, remove the following:

* The front air deflector - Refer to Air Deflector Replacement - Front Bumper Fascia (Service and Repair).
* The front upper grille - Refer to Fascia Grille Replacement - Front Bumper - Upper (Fascia Grille Replacement - Front Bumper - Upper).

Installation Procedure




1. If a new fascia is being installed, install the following:

* The front air deflector - Refer to Air Deflector Replacement - Front Bumper Fascia (Service and Repair).
* The front upper grille - Refer to Fascia Grille Replacement - Front Bumper - Upper (Fascia Grille Replacement - Front Bumper - Upper).

2. Position the front bumper fascia to the vehicle.
3. Install the fascia ends over the shoulder bolts extending down from the front fender upper support bracket assembly, and push the fascia back.
4. Install the upper front fascia push-in retainers.
5. Install the lower front fascia push-in retainers.




6. Install the push-in retainers to the front of the front wheelhouse panel.
7. Connect the electrical connector to the fog lamp.