Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> L Series L4-2.2L VIN F >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Testing and Inspection >> Initial Inspection and Diagnostic Overview >> Diagnostic System Check
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Diagnostic System Check

DIAGNOSTIC SYSTEM CHECK

CAUTION: If the vehicle interior is exposed to moisture and becomes soaked up to the level of the sensing and diagnostic module (SDM), the SDM and SDM harness connector must be replaced. The SDM could be activated when powered, which could cause airbag deployment and result in personal injury.

These diagnostic procedures will help you to find and repair SIR system malfunctions. For best results, use the diagnostic tables and follow the sequence listed below:
1. Refer to the diagnostic table as directed by a diagnostic system check - Restraint Systems. The diagnostic tables will help you to diagnose any SIR system malfunction. Bypassing these procedures may result in the following:
- Extended diagnostic time
- Incorrect diagnosis
- Incorrect parts replacement Diagnostic Trouble Code Descriptions
2. Repeat the diagnostic system check - Restraint Systems after you perform any repair or diagnostic procedures. This will verify that you correctly performed the repair. This will also ensure that no other malfunctions exist.

Test Description

Steps 1-6:




The numbers below refer to the step numbers on the diagnostic table.
1. Tests to see if the AIR BAG indicator flashes 7 times when the ignition is turned ON.
2. Tests to see if the scan tool powers up.
3. Tests to see if the scan tool can communicate with the inflatable restraint sensing and diagnostic module (SDM).
4. Tests to see if there are current or history diagnostic trouble codes (DTCs) present.
5. Tests to see if there are communication DTCs (U-codes) present.
6. Tests to see if DTC B1000 (ECU Malfunction) is present.
pro multis · About Operation CHARM