33. Cylinder Head Disassemble

Cylinder Head Disassemble

Tools Required

* J 8062 Valve Spring Compressor
* J 36017 Valve Seal Remover
* J 43963 Valve Spring Compressor (off car)




1. Remove the coolant air bleed hose fitting.





Important: Ensure that the valve train components are kept together and identified in order for proper re-installation in their original position.

2. Using the J8062 and the J43963, compress the valve spring.
3. Remove the valve keys.
4. Slowly release the J8062 and the J43963 from the valve spring assembly.
5. Remove the retainer.




6. Remove the spring.





Notice: Do not damage the valve guide. Remove any burrs that have formed at the key groove by chamfering the valve stem with an oil stone or a file.

7. Remove the valve seal. Use the J36017. Do not reuse.




8. Remove the valve.
9. Remove the remaining valves.




10. Remove the cylinder head plugs.