Powertrain Control Module Programming and Setup

Powertrain Control Module Programming and Setup

The following service procedures require either a programming or a setup event be performed for a complete repair.

Powertrain Control Module (PCM) Replacement

If the powertrain control module (PCM) is replaced, the following procedures must be performed:

1. PCM Reprogramming--Refer to Service Programming System (SPS).
2. Crankshaft Position (CKP) Variation Learn--Refer to Crankshaft Position System Variation Learn.

PCM Reprogramming

If the PCM needs to be reprogrammed, refer to Service Programming System (SPS).

Setup for Component Replacement

The replacement of some components will require a setup procedure for complete repair.

If any of the following components are replaced, a crankshaft position (CKP) variation learn procedure must be performed. Refer to Crankshaft Position System Variation Learn.
- Engine replacement.
- Any engine repair that disturbs the crankshaft position CKP sensor or its relationship with the crankshaft reluctor wheel.
- CKP sensor.